Panasonic ERJ 1R Series Manual

Also see for ERJ 12 Series: Quick start guide

Panasonic ERJ 1R Series Manual Manual pdf 1 page image

● Small size and lightweight● High reliability : Metal glaze thick film resistive element and three layers of electrodes● Compatible with placement machines : Taping packaging available● Suitable for both reflow and flow soldering● Low resistance tolerance : ERJXG, 1G, 2R, 3E, 6E, 8E, 14, 12, 1T series ：±1 ％ERJ1R, 2R, 3R, 6R series ：±0.5 ％● Reference standard : IEC 60115-8，JIS C 5201-8，JEITA RC-2134C● AEC-Q200 compliant (except ERJ1R, ERJXG, ERJ1GN)● RoHS compliant■ As for packaging methods, land pattern, soldering conditions and safety precautions,please see data files.Note : Please check the "Ratings" for the presence/absence of part numbers for combinations of the symbols below.● ERJ 1R, 2R, 3R, 6R series : ±0.5 %Explanation of part numbersPrecision Thick Film Chip ResistorsE±50 × 10–6 /K (3R, 6R)K0.063 WPart No.Code CodeT.C.R.T.C.R.，Marking Packaging methodsResistance toleranceCode PackagingERJ1RResistance valueC±0.5 ％D±100 × 10–6 /K (3R, 6R)ERJ3RERJ6RThick filmchip resistors ±50 × 10–6 /K (1R, 2R)HPower ratingShould a safety concern arise regarding this product, please be sure to contact us immediately.Punched carrier taping4 mm pitch, 5,000 pcsPunched carrier taping2 mm pitch, 10,000 pcsPressed carrier taping2 mm pitch, 15,000 pcs22-Dec-22XDesign and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.ERJ2RVThe first three digits are significantfigures of resistance and the last onedenotes number of zeros following.Example : 1002 → 10 KΩ±100 × 10–6 /K (2R)6R060308053R0.1 W0.1 WERJ typeERJ 3E, 6E, 8E, 14, 12, 1T seriesERJ 1R, 2R, 3R, 6R seriesERJ XG, 1G series2RSize, Power rating0402 BProduct codeCode inch0.05 W02011RToleranceFeatures1 2 3 4 5 6 7 8 9 10 11 12E R J 3 R B Ｄ 1 0 0 2 V(Oct. 2021) Products marked as “NRFND” arenot recommended for new design.Target products : ERJ8E, 14, 12, 1TseriesPlease refer to the recommended alternatives with”Design Support Tool” ・