Panasonic ERJ XG Series Quick Start Manual

Also see for ERJ 12 Series: Manual

Panasonic ERJ XG Series Quick Start Manual Manual pdf 1 page image

● Small size and lightweight● High reliability : Metal glaze thick film resistive element and three layers of electrodes● Compatible with placement machines : Taping packaging available● Suitable for both reflow and flow soldering● Reference standard : IEC 60115-8，JIS C 5201-8，JEITA RC-2134C● AEC-Q200 compliant (except ERJXG, ERJ1GN)● RoHS compliant■ As for packaging methods, land pattern, soldering conditions and safety precautions,please see data files.Note : Please check the "Ratings" for the presence/absence of part numbers for combinations of the symbols below.● ERJXGN, 1GN, 1GJ, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T series，±5 %* Series XGN, 1GN, 1GJ and 2GE do not have value markings on the black side.Please omit the letter "Y" from the part number for these series of parts.The other part number factors will move up respectively.* For the automotive application, please use ERJ1GJ as 0201 inch size from the new design.Not recommended for new designThick Film Chip ResistorsFeaturesExplanation of part numbers0.1 WYValuemarking onblack side*Nil No marking01005Packaging methodsMarkingCode MarkingResistance valueResistance toleranceX ERJ2GEJumperPunched carrier taping2 mm pitch, 10,000 pcsThe first two digits aresignificant figures ofresistance and thethird one denotesnumber of zerosfollowing. Jumper isexpressed by R00.(Ex.) 222 : 2.2 kΩ4R7 : 4.7 Ω0 ERJXGNERJ1GNERJ1GJCJ ±5 ％Part No.Code Packaging201025120.125 W0.25 W0.5 W0.75 W0.75 W1 WCode ToleranceSize, Power rating0.1 W0201 0.05 W1GJThick filmchip resistorsProduct codeCode inch Power rating0.031 W12XGN8GE3GE 0603080512066GE18121210141GN2GE 0402Y Pressed carrier tapingW8P2, 20,000 pcsEmbossed carrier tapingW4P1, 40,000 pcsPressed carrier taping2 mm pitch, 15,000 pcsUERJ typeERJ XG, 1G, 2G, 3G, 6G seriesERJ 8G, 14, 12, 12Z, 1T seriesShould a safety concern arise regarding this product, please be sure to contact us immediately. 22-Dec-22Punched carrier taping4 mm pitch, 5,000 pcsV12ZERJ1TDesign and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.1TEmbossed carrier taping4 mm pitch, 5,000 pcsEmbossed carrier taping4 mm pitch, 4,000 pcsERJ3GEERJ6GEERJ8GEERJ14ERJ12ERJ12ZU1 2 3 4 5 6 7 8 9 10 11 12E R J 3 G E Y J 1 0 2 VNRFND(Oct. 2021) Products marked as “NRFND” arenot recommended for new design.Target products : ERJ8G, 14, 12, 12Z, 1T seriesPlease refer to the recommended alternatives with”Design Support Tool” ・NRFNDNRFNDNRFNDNRFNDNRFNDNRFNDNRFNDNRFNDNRFND