Panasonic ERA 1A Series Manual

Panasonic ERA 1A Series Manual Manual pdf 1 page image

● High reliability : Stable at high temperature and humidity(85 ℃ 85 %RH rated load, Category temperature range : –55 ℃ to +155 ℃)● High accuracy : Low resistance tolerance and Temperature Coefficient of Resistance● High performance : Low current noise, excellent linearity● Reference standard : IEC 60115-8, JIS C 5201-8, JEITA RC-2133C● AEC-Q200 compliant (except ERA1A)● RoHS compliant■ As for packaging methods, land pattern, soldering conditions and safety precautions,please see data files.Note : Please check the "Ratings" for the presence/absence of part numbers for combinations of the symbols below.● E24 series● E96 series and other Resistance valuesNote : Duplicated resistance values as E24 series part umbers shall follow E24 part numbers.(apply three digit resistance value)High Reliability TypeMetal Film (Thin Film) Chip Resistors,FeaturesExplanation of part numbersERA A typeERA 1A, 2A, 3A, 6A, 8A seriesPunched carrier taping4 mm pitch, 5,000 pcsPunched carrier taping2 mm pitch, 10,000 pcsPressed carrier taping2 mm pitch, 15,000 pcsThin filmchip resistorsCodeProduct code Size, Power rating Temp. coefficient3A 0603 0.1 W E ±25×10 -6/K2A 0402 0.063 W P ±15×10 -6/KThin filmchip resistorsResistance value Packaging methodsCode±10×10 -6/KT.C.R.W ±0.05 % C ERA1Ainch size Power ratingCode inch size6A 0805 0.125 WSize, Power rating Temp. coefficient Resistance valuePart No.8A 1206 0.25 W1A 0201 0.05 W RResistance toleranceCode ToleranceCodeResistance toleranceCode ToleranceB ±0.1 %±0.25 %H ±50×10 -6/K D ±0.5 %CProduct CodeCode0.05 W R ±10×10 -6/KConsist of three figuresfor E24 series resistancevalue.The first two digits aresignificant figures ofresistance and the thirdone denotes number ofzeros following.(example) 102 : 1 kΩX ERA2AERA3AERA6AERA8APackaging Part No.K ±100×10 -6/K VPower ratingC6A 0805 0.125 WPackaging methodsT.C.R. Code Packaging3A 0603 0.1 W E ±25×10 -6/K CP ±15×10 -6/K BConsist of four figures forE96 series resistancevalue.The first three digits aresignificant figures ofresistance and the fourthone denotes number ofzeros following.(example)1051 : 1.05 kΩERA1A2A 0402 0.063 W ±0.1 %1A 0201H ±50×10 -6/K DW ±0.05 % Pressed carrier taping2 mm pitch, 15,000 pcsDesign and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.Should a safety concern arise regarding this product, please be sure to contact us immediately. 1-Jul-21ERA3AERA6AERA8A±0.5 %8A 1206 0.25 W K ±100×10 -6/K V Punched carrier taping4 mm pitch, 5,000 pcsPunched carrier taping2 mm pitch, 10,000 pcs±0.25 %X ERA2A1 2 3 4 5 6 7 8 9 10 11E R A 3 A E B 1 0 2 V1 2 3 4 5 6 7 8 9 10 11 12E R A 3 A E B 1 0 5 1 V