Panasonic Diga DMR-PWT520 Operating Instructions Manual

Also see for Diga DMR-PWT420: Operating instructions

Contents

Convenient functionsVQT4E90 81Home Network SettingsYou can set the DLNA (Server) function.(> 63)Home Network functionYou can switch between enable/disable ofthe DLNA (Server) and DMR (MediaRenderer) function.• If “On” is selected, “Power Save inStandby” is fixed to “Off”. (> right)• This cannot be set to “On” if theconnection with the wireless broadbandrouter is not encrypted in the wirelessconnection.Setting device nameIt is also possible to change the name ofthis unit on the network.• Select from a preset listSelect the preset name, then press [OK].• Create nameEnter the name.Refer to “Entering text”. (> 85)Registration type for remote devices• Automatic:All connected devices on the samenetwork can access this unit.• Manual:Only registered devices can access thisunit.Remote device list• To register equipment manually1 Select the device name or the MACAddress for the device you want toregister, then press [OK].2 Select “Yes”, then press [OK].• To deregister equipment1 Select the registered equipment,then press [OK].2 Select “Yes”, then press [OK].• This function cannot be enabled when“Automatic” is selected in “Registration type forremote devices”. (> above)• The maximum number of equipment that can beregistered is 16.OthersStandby SettingsPower Save in Standby• On:It will go into the “Power Save in Standby”mode.• On Timer:“Power Save in Standby” is activated whenthe set time comes.• If the clock has not been set, “Power Savein Standby” is activated at all hours.• Off:It is possible to start quickly from standbymode. (Quick Start mode)• This function cannot be enabled when the DLNAfunction is enabled in “Home Network function”. (> left)• If “On” or “On Timer” is selected, “Unit’s Display” is fixedto “Automatic”. (> 78)• [PWT520] The setting may be changed to “Off”automatically when the setting for videocommunication is changed. (> 66)Automatic StandbySet the time to turn the unit to standby modeautomatically.When the unit is not operating, the unit will beturned to standby mode once the set time haspassed.• When “REWIND LIVE TV” is set to “On”(> 75), “Off” cannot be selected.Automatic Standby after OTR• On:This unit is turned to standby mode when itis not operated for approximately 5 minutesafter completing “Automatic Stop” or“Recording Time” (> 28).Automatic Standby after Copy• On:This unit is turned to standby mode when itis not operated for approximately 5 minutesafter completing copy (> 59).