Panasonic Diga DMR-BW850 Operating Instructions Manual

Also see for DIGA DMR-BW850: Operating instructions

Contents

92RQT9433Network Settings(All factory default settings are indicated with underlined text.)IP Address/DNS Settings (➡ 94)y Press [OK] to show the following settings.Connection Test[--]IP Address Auto-assignment[On] [Off]IP Address[---.---.---.---]Subnet Mask[---.---.---.---]Gateway Address[---.---.---.---]DNS-IP Auto-assignment[On] [Off]Primary DNS[---.---.---.---]Secondary DNS[---.---.---.---]Connection Speed Auto-configure[On] [Off]Connection Speed SettingThis is enabled only when “Connection Speed Auto-configure”is turned “Off”.[10BASE half duplex] [10BASE full duplex][100BASE half duplex] [100BASE full duplex]Proxy Server Settings (➡ 95)y Press [OK] to show the following settings.InitializeSet the setting of the “Proxy Server Settings” back.Proxy Address(The initial setting is blank.)Proxy Port Number(The initial setting is “0”.)Connection Test[----]Network Service (➡ 95)y Press [OK] to show the following settings.Network LockYou can restrict using VIERA CAST.Follow the on-screen instructions. Enter a 4-digit PIN with thenumbered buttons when the PIN setting screen is shown. It willbe the common PIN for “DVD-Video Ratings”, “BD-VideoRatings” and “Network Lock”Do not forget your PIN.[On] [Off]Changing Settings (When “On” is selected)[Change PIN]Automatic Volume Control[On][Off] Select “Off” when the audio is warped while usingVIERA CAST.Picture Zoom[In] The picture is enlarged.[Out] The picture is reduced.y Select “Out” when display of the contents is truncated.Others(All factory default settings are indicated with underlined text.)Automatic StandbySelect how long the unit remains on when it is not being used.[2 hours] [4 hours] [6 hours] [Off]Remote ControlChange the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonicproducts close together.[BD 1] [BD 2] [BD 3]Use “BD 1”, the factory set code, under normal circumstances.1 Press [e, r] to select the code (“BD 1”, “BD 2” or “BD 3”)and press [OK].To change the code on the remote control2 While pressing [OK], press and hold the numbered button([1], [2] or [3]) for more than 5 seconds.3 Press [OK].■ When the following indicator appears on theunit’s displayThe unit’s remote control codeChange the code on the remote control to match the main unit’s(➡ step 2).NoteExecuting “Shipping Condition” in the Setup menu returns themain unit code to “BD 1”. Change the remote control code to 1(➡ step 2).Clocky Press [OK] to show the following settings.Automatic Clock SettingThis unit usually obtains time and date information from digitalbroadcasts.But, if the time is not set correctly, set it to “Off” and perform“Manual Setting”. (➡ below)[On] [Off]Daylight Saving TimeSelect time offset from the standard time for Summer Time.y Normally select “Automatic”.y If there is a gap between displayed time and actual time, setthis function.[Automatic] [0 hour] [+1/2 hour] [+1 hour]Manual Settingy Press [OK] to show the following setting.ClockTime DatePlease set clock manually.OK: store RETURN: leave15 : 45 : 39 1 . 8 . 2009OKRETURN1 Press [w, q] to select the item you want to change.The items change as follows:Hour Minute Second Day Month Year2 Press [e, r] to change the setting.3 Press [OK] when you have finished the settings.The clock starts.Changing the unit’s settings