33RQT9433RecordingTo release the unit from recordingstandbyEven when the unit is turned off, you can display the timer recordinglist by pressing [PROG/CHECK].1 Press [PROG/CHECK].2 Press [e, r] to select the programmeand press the “Red” button.y The timer icon “z” (➡ 34) will change from red to grey.y You cannot cancel timer recording standby mode as long aseven one timer icon “z” (red) remains in the timer recordinglist.y Press the “Red” button again to activate timer recordingstandby. (The timer icon “z” will change to red.)Auto Renewal RecordingIf you record a programme repeatedly everyday or every week usingtimer recording, the unit will record the new programme over the oldone.This function can be used only when weekly recording or dailyrecording is selected. (➡ 23)1 Press [PROG/CHECK].2 Press [e, r] to select the programmeand press [OK].3 Press [w, q] to select “Renew”column.4 Press [e, r] to select “ON” and press[OK].Notey If a programme set for Auto Renewal Recording is protected orwhile playback is taking place from the HDD, or while copying, theprogramme will not be overwritten. Instead the programme set forrecording will be saved as a separate programme, and thisprogramme will be the one to be overwritten when the next AutoRenewal Recording takes place.y When there is not enough space on the HDD, the programme maynot be recorded completely.To cancel recording when recordinghas already begunPress [INPUT SELECT] or [1 2 CH] to display the programme thatyou want to stop recording on the TV screen while 2 programmesare simultaneously recording.1 Press [g].e.g.,Stop RecordingYes NoTimer recording of this programme in progress.Stop this timer recording?Recording [ TV ONE 001 ]OKRETURN2 Press [w, q] to select “Yes” and press[OK].y If you stop a timer recording, it will be cancelled.However, if you have already set the weekly or daily timerrecording, the recording will start at the next scheduledtime.
