Menu
Panasonic Diga Blu-ray DMR-BCT950 Operating Instructions Manual
                                                                                                                        |
Convenient functionsSQT080294Basic Settings7.1ch Audio Reformatting[BD-V]Surround sound with 6.1 ch or less isautomatically expanded and played back at7.1 ch.• If “Off” is selected, sound is played over theoriginal number of channels. (Note that inthe case of 6.1 ch audio, playback will be at5.1 ch)Audio reformatting is enabled in the followingcases:- When you have selected “PCM” in “DigitalAudio Output”. (> 91)- When the audio is Dolby Digital, DolbyDigital Plus, Dolby TrueHD or LPCM.Contents Type FlagIf “Automatic” is selected, the optimal methodof playback depending on the TV (e.g.cinema) will automatically be selected (onlywhen the TV supports Contents Type Flag).VIERA LinkSelect “Off” when you do not want to useVIERA Link.Common InterfaceAccess to software contained on CI module.(> 14)• Select “Slot 1:” or “Slot 2:” and press [OK].Follow the on-screen instructions.• On-screen instructions may not correspond to the remotecontrol buttons.• For more information about TV service, please contactyour service provider.• Depending on the card, in some cases its use togetherwith this unit may be limited or not possible.NetworkEasy Network SettingPress [OK] to start Easy Network Setting. (> 24)Network SettingsLAN Connection ModeSelect the LAN connection method.• When not using wireless LAN (when turningit off), select “Wired”.Wireless SettingsThis allows to set and check the connectionsettings of the Wireless router.Connection SettingThe Wireless router connection wizard willbe displayed.Double Speed Mode Setting ( 2.4GHz )When a 2.4 GHz wireless format is used,this setting sets the connection speed.• If you connect using the “Double SpeedMode (40MHz)”, 2 channels use thesame frequency band, and there isconsequently a greater risk of receptioninterference. This can cause theconnection speed to drop or theconnection to become unstable.IP Address / DNS SettingsCheck the connection of the network or setthe IP address and DNS.• To set the IP address and DNS1 Set “IP Address Auto-assignment” and“DNS-IP Auto-assignment” to “Off”.2 Select the item, then press [OK] to showthe respective setting.• When the router’s DHCP server function isnot activated, check the numbers of otherconnected devices such as personalcomputers, then assign a number differentfrom those of other devices for the “IPAddress” and assign the same number for“Subnet Mask” and “Gateway Address”.Proxy Server SettingsCheck and set the connection to the Proxyserver.• Press [OK] to show the respective setting. |
Related manuals for Panasonic Diga Blu-ray DMR-BCT950
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved