160DX-600/800APR 2002Edition 1.0070 LINE ERROR 1 = 128 lines2 = 256 lines3 = 512 lines4 = 1024 lines5 = 2048 lines6 = Off(will not disconnect line)1. Selects the line disconnect condition duringreception. If the number of line errors exceed thissetting, the unit will disconnect the line.2. Selects the transmit condition of RTP/PIP or RTN/PIN.(Available if No.73 Error Detect is set to "LINES")(See Note 1)071 TOTAL ERROR 1 = 5%2 = 10%3 = 15%4 = 20%Selects the transmit condition of RTP/PIP or RTN/PIN.(Available if No.73 Error Detect is set to "RATE".)(See Note 2)072 CONTINUOUSERROR1 = Off (unlimited)2 = 3 lines/STD3 = 6 lines/STD4 = 12 lines/STDSelects the continuous total error criteria of Off/3/6 or12 lines in Standard mode. If continuous total errorexceeds this setting, the unit will transmit RTN/PIN.(Available if No.73 Error Detect is set to "RATE".)073 ERRORDETECT1 = Lines2 = RateSelects the error detect condition Lines/Rate.074 RTN RECEIVE 1 = Disconnect2 = ContinueSelects whether to disconnect the phone line orcontinue when "RTN" is received.075 CODING 1 = MH (MH only)2 = MR (MH or MR)3 = MMR(MH or MR or MMR)Selects the coding scheme.076 Not Used077 RX JAMLENGTH1 = Off (unlimited)2 = 2 m3 = 8 mSelects the maximum length of a receiveddocument that can be printed.078079Not Used080 DOC. TOPFEED-5.0 mm~+5.0 mmAdjusts the distance between the scanning sensorON position and the scanning start position.081 DOC. ENDFEED-5.0 mm~+5.0 mmAdjusts the distance between the scanning sensorOFF position and the scanning end position.082 JAM LENGTH 1 = 1 m2 = 2 m3 = 8 m4 = UnlimitedSelects the maximum length of the original that canbe scanned.083 Not Used084 LINE AS NOPAPER1 = Ring (ring)2 = Busy (keep line busy)Selects whether to ring or send a busy tone to theremote station when the recording paper runs out orthe unit cannot receive because of any trouble.085 Not Used086 REDUCTIONFINE1 = Off2 = OnSelects whether the resolution is preset to Fine,when sending with reduction B4→A4.(For B4 Scanning Model only)Service Mode 1 : Function Parameter TableNo. Parameter Selections Function
