22RQT8792Enjoying in a carEnjoying video in the back seat with the Headrest Mounting BracketYou can enjoy video in the back seat attaching the unit to the back of the front seat.≥ Please insert the disc before attaching the unit to the headrest bracket.1 Attaching the headrest bracket to the front seat.2 Adjusting the monitor.≥ Do not leave the unit on a surface that may become hot such as a dashboard. The unit isnot heat-resistant so may malfunction.≥ The driver must not operate this unit while the vehicle is moving.Do not operate this unit where it can be viewed by the driver.Driver operation or viewing of this unit while the vehicle is moving will cause distraction which mayresult in serious accident and personal injury or property damage.≥ Do not attach or detach while driving, and do not attach in the following locations,otherwise it may result in injury or traffic accidents:–anywhere other than the back of the seat–in a location that interferes with the driver’s view or operation of the car–in a location that interferes with the operation of an airbag–in a location that interferes with the driving instruments≥ Make sure that the bracket belt is securely fastened, and check the lock on the unit.In the event of an accident, sudden acceleration, or braking, the unit could become loose and cause injury.1 Fold the monitor down towards the frontof the unit.2 Rotate the monitor backwards so thescreen is facing out.DO DO NOTSide viewHeadrest MountingBracket (included)2 Close the buckle and adjust the beltuntil it fits tightly around the headrest.1 Adjust the headrest so there is an openspace of about 3 cm.Attach to the seat sothat the label side ofthe bracket can beseen from the rearof the seat.If this space islarger than 3 cm,the unit couldbecome looseand cause injuryin the event ofan accident etc.Enjoying in a car