Menu
Panasonic CZ-CWEBC2 Operation Manual
                                                     | |
9 Auxiliary Settings44(4)To close the dialog box displayed in the process of a system configuration check, currentsystem configuration registration, or initialization, click on “×” on the upper right corner.As the process continues after the dialog box is closed, if you attempt to perform otheroperation, the same message will be displayed again. The message is also displayed againif you click on “Check” in the screen example.(5) Power offIf you click on “Power off”, the message shown below will be displayed.If you click on “YES”, the system is preparing for safely shutting down the Web Interface mainunit. Never turn off the Web Interface main unit while the following message is displayed:Make sure that the following message is displayed then set the Power switch of the WebInterface to OFF.After this message is displayed, to log in again, the Power switch of the Web Interface mustbe set to ON again.(6) Check button When you click on the “Check” button while this button is valid, the current process of theWeb Interface will be displayed.Main Sub4 4 |
Related manuals for Panasonic CZ-CWEBC2
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved