Menu
Panasonic CZ-CWEBC2 Operation Manual
                                                     | |
9 Auxiliary Settings36 For a weekly timer, select a daily timer from the pulldown menu in the same way as witha daily timer.Select a desired daily timer number (D1–D50, holiday, or special day 1–5) for each day of the week.A maximum of 50 weekly timers can be set. For disabling input/changed data and returning to the original settings. Clicking on this button will enable the input settings and send them to the Web Interface.The input data will only be enabled after being sent.Setting data for each daily timer No. (D1, D2, . . .) must be sent each time the setting for thedaily timer is completed. If you attempt to move to D2 setting while you are setting D1, forexample, the error message “Send for each daily timer.” will be displayed, as shown below.If this message is displayed, click on the “Send” button to enable the setting, or click onthe “Cancel” button to disable the setting then perform the setting for another daily timerNo. The items for which operations with the remote controller are prohibited can beconfi rmed.When you click on this button, the screen shown below will be displayed.You can only confirm the prohibited items. You cannot change the setting. To changesettings, see “Prohibiting remote control use”.The setting temperature will be automatically set within the range of each airconditioner's upper and lower limit values during actual operation, as the upper andlower temperature limits vary depending on the indoor unit models. Setting for anitem for which “Set time” is not set will be invalid.Main Sub4 1 |
Related manuals for Panasonic CZ-CWEBC2
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved