Panasonic CT-32D12D Operating Instructions Manual

Contents

Panasonic CT-32D12D Operating Instructions Manual Manual pdf 5 page image

I NSTALLATION3 lInstallationTelevision LocationFollow these recommendations before deciding the location of your television.r Avoid excessive sunlight or bright lights, including reflections.r Keep away from excessive heat or moisture. Inadequate ventilation may cause internal component failure.r Fluorescent lighting may reduce remote control transmitting range.r Keep away from magnetic equipment, including motors, fans and external speakers.CAUTION: Use this television receiver only with the cart, stand, tripod, bracket, or table specified by the manufacturer, orsold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury fromtip-over. In order to avoid injury to children, never place your television receiver on a piece of furniture that is capable ofbeing tilted by a child leaning on it, pulling on it, standing on it, or climbing on it.CT-27D12D, CT-27D12SD, CT-27D12DU:CAUTION: These television receivers for use only with PANASONIC TY-27G22M (TY-27G22M-PC for Canada) stand. Use withother carts (or stands) is capable of resulting in instability causing possible injury.CT-32D12D, CT-32D12DU:CAUTION: These television receivers for use only with PANASONIC TY-32G22M (TY-32G22M-PC for Canada) stand. Use withother carts (or stands) is capable of resulting in instability causing possible injury.CT-36D12D, CT-36D12DU:CAUTION: These television receivers for use only with PANASONIC TY-36G22M (TY-36G22M-PC for Canada) stand. Use withother carts (or stands) is capable of resulting in instability causing possible injury.Optional Cable ConnectionsShielded audio and video cables should be used between components. For best results:r Use 75-ohm coaxial shielded cables.r Use appropriate input and output connectors that match your component connectors.r Avoid long cables to minimize interference.AC Power Supply CordCAUTION: TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT OF AC OUTLETAND FULLY INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADECAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT OR PINCHED,PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.Cable / Antenna ConnectionFor proper reception, either a cable or antenna connection is required.Cable ConnectionConnect the cable supplied by your local cable company.Note: A cable converter box may be required for proper reception. Check with your local cable company forcompatibility requirements.Antenna Connection• For proper reception of VHF/UHF channels, an external antenna is required. For best reception, anoutdoor antenna is recommended.Note: Cable Mode is preset at the factory. Antenna users must change to TV mode in the Set Up Menu underProg Chan.Polarized plug75 Ohm VHF/UHFon back of TVIncoming Cable fromCable CompanyIncoming Cable fromHome Antenna