Panasonic CT-31G10 Operating Instructions Manual

Panasonic CT-31G10 Operating Instructions Manual Manual pdf 10 page image

Control OpuradunPuwur Button - Pr_s [tle POWER button to turnON. Press again to turn OFF.POWERChannel Chal_gu. (iwu upuo,,=_)Option 1.Press the CHANNEL (CH) UP or DOWN button [osequentially scan through programmed channels(when On Screen Menus are not displayed).NOTE: TV/CABLE switch (located on Remote) must beset in the TV position. TVICABLELocated On Remote ControlVolume Button - Press the VOLUME (VOL)LEFT or RIGHT button for desired listening level (whenOn Screen Menus are not displayed).Located On Remote ControlDecreasesVolume LevelIncreasesVolume Level._======_=====_ _ Selects Next___ Higher ChannelSelects Next fLower ChannelOption 2.Press two digits on keyboard (Example press 0,then 5 for channel 05). For channels over 99, pressthree digits on keyboard.Mute Button - Press the MUTE button to quicklyreduce sound level (Mute will appear on screen). Pressagain to restore sound.MUTEHelpful Hints:• Helpful information will disptay On Screen momen-tarily when Receiver is first turned on and when thechannel is changed.• When using keyboard entry for channels 10,11 and12 in the CABLE mode there is a slight delay beforechannel change because of the capability of tuningcable channels 100 to 125.NOTE: If "SPEAKER OFF" is displayed On Screenafter pressing the VOLUME button, refer toi Audio Menu to turn Speakers "ON".I@ @ @II@ ® ®LVCR Function Buttons - The VCRFUNCTION buttons have been designed to operatenumerous brands of VCRs. The infra-red code must beobtained prior to use. (Please refer to Programming theUniversal Remote for programming instructions.)NOTE: The TV/CABLE switch (located on Remote)must be in the TV position.TVlCABLErm--1VCR "_POWER RECORD Ir----i r---niL....REW PLAY FFMOVE SIZE PIPR'VNCR STOP PAUSEr-7 r-a7 f--1FREEZE SWAPVCR CHANNEL....-10-