Panasonic CT-27SF13U Operating Instructions Manual

Panasonic CT-27SF13U Operating Instructions Manual Manual pdf 36 page image

Set Up Features (cont.)Located On Remote ControlSelects or AdjustsFeatu res whenMenu is DisplayedAuto Program - The Auto Programming featureallows you to place all channels with a video signal intoChannel Scan Memory. When you press the CHANNELUP/DOWN button, only those channels with a videosignal will be accessed.NOTE: TV or Cable Tuning mode must be set properlyfor your system.1. Press the ACTION button to display the Main Menu.2. Press the CH UP/DOWN and VOL LEFT/RIGHTbutton to highlight the Set Up Icon.3. Press the ACTION button to display the Set UpMenu.Displays and Exits Menus4. Press the CH UP/DOWN button to highlight AUTOPROGRAM.5. Press the VOL LEFT/RIGHT button to start AutoProgramming Scan. Channels will automatically ad-vance until all channels have been scanned.Note: Channel numbers with video signal presentwill turn blue which indicates stored inChannel Scan Memory.6. Press ACTION button twice to exit menus.NOTE: Some channels with very weak signals may belocked into memory. These must be deletedmanually using the Manual Program feature.Helpful Hints:Blue channel numbe_Scan Memory ..........All channels are aVaiial_|e 6y di(e_t::a_S:_U_slng _thenumeric keypad (0 through 9 buttons),After Auto Programming Scan has completed, upto 15channels will be programmed into the FAVORITEChannel Scan if space is available. Any originalchannels that were programmed into FAV CHANNELwill remain. (Refer to Favorite Channel Scan fordeleting unwanted channels.) : _ ._:.::::_.....- 36 -