Panasonic CT-13R32 Operating Instructions Manual

Also see for CT-13R32: Operating instructions Operating instructions Operating instructions Operating instructions

Contents

Panasonic CT-13R32 Operating Instructions Manual Manual pdf 5 page image

- 5 -LOCKRefer to your V-CHIP manual for the operation ofLOCK menu.FM Radio Operation(Models CT-13R32C, CT-13R42C, CT-13R52D,CT-20D11D, CT-20G6D, CT-25G6C)Some televisions have built-in FM tuner. You can pre-program up to 9 different FM stations. Use the follow-ing procedure to program the FM stations.Procedure1. Press TV/VIDEO button on the remote controltwice to get into FM mode.2. Press ACTION button to display MENU Icons.3. Press pq or tu to highlight the SET UP icon.4. Press ACTION button to display the SET UPmenu.5. Press p or q button to highlight PROG CHAN.6. Press u button to highlight FM ANTENNA.7. Press t or u button to select INT or EXT.• INT - For Cable TV users.• EXT - For antenna users.8. Press q button to highlight FM Program.9. Press u button to display FM PROGRAM screen.10. Press numeric keys 1 through 9 on the remotecontrol to select the appropriate FM position.11. Press p or q button to select the desired FMfrequency.12. Press u button to add the station to memory.13. Repeat steps 10 through 12 until all 9 positionshave been programmed into memory.14. Press ACTION button to exit the programmingmenu.You can select any of the 9 stations by pressing theappropriate number button on the remote control.Tuning FM station manuallyIn FM mode, press p or q button to change thestation frequency.Note: In FM mode, press R-TUNE button to togglebetween TV and FM radio.CCPROG CHANNELFM ANTENNA INT uFM PROGRAM uOTHER ADJ.SET UPFM PROGRAMFM POSITION 1 87.5 MHZu TO ADDPRESS ACTION TO EXITDC Models ONLYThis TV model operates on both standardhousehold current (120 volt, 60 Hz AC) and carbattery (12 volt negative ground DC) through thecigarette lighter. An AC power cord and a carcigarette lighter adapter cord are supplied.Household InstallationInsert the AC power cord into the connection onthe rear of the TV. Connect the two pronged plug toan AC outlet (120 volt, 60Hz). If you are unable toinsert the plug fully into the wall outlet, try reversingit. If the plug does not fit, contact an electrician. Donot force the plug or defeat the safety purpose ofthe polarized plug.Car InstallationInsert the power cordinto the connection onthe rear of the TV.Remove the cigarettelighter from your car andinsert the car cigarettelighter adapter plug.Note: The suppliedcar cord isdesigned foruse with anegativegroundbattery only.Fuse ReplacementIf the TV does not turn on, the cigarette lighteradapter fuse may have blown.Procedure• Turn TV OFF and unplug the power cordfrom the cigarette lighter.• Remove the cap and replace the fuse,as shown in illustration.• Insert the supplied spare fuse andreplace cap.Note: Use only a 7A-125V fuse forreplacement.AC/DC POWER S OURCESHelpful Hints: Do Not Overload theEngineKeep the engine idling while operating the TV,especially when the temperature is low and whenviewing the TV for over an hour.Do not operate the TV while starting the engine.Disconnect the power cord from cigarette lighterwhen not in use.Helpful Hints: Keeping LighterSocket CleanAlways keep the cigarette lighter socket clean forbetter contact. A bad contact can overheat thecar cord plug.(12V/DC)(120V/AC)AC/DC Power CordConnectionsCar Cord Plug with Fuse and CapMAIN M ENU lR EMOTE C ONTROL lS PECIAL F EATURES lL ANGUAGES lTIMER lC HANNEL C APTION lL OCK lFM R ADIO O PERATION lAC/DC P OWER S OURCES l