5712.13 Patrol Operation• To monitor air dirtiness level by using Patrol sensor and to maintain air freshness by activates e-ion operation• Patrol operation starts conditiono When the unit operation is started with “OFF/ON” buttono When the unit stops, “Patrol” operation is selected, Patrol individual operation will start.o During cooling only operation, “Patrol” operation is selected.• Patrol operation stops condition (when any of the following condition is fulfilled):o When “OFF/ON” button is selected.o During any operation with Patrol, “PATROL/e-ion” button is pressed.o When OFF Timer activates.• To disable the Patrol Operation during unit starts (default) with “OFF/ON” buttono Press “Set” button continuously for 15 seconds by using pointer during Air Conditioner is OFF condition toenter internal setting mode.o Press “Timer Decrement" button to select “Pt dFLt”.o Press “Timer Set” button to toggle Patrol operation default OFF/ON. Long "beep": Turn OFF Patrol operation default. Short "beep": Turn ON Patrol operation default.SETSETTransmit Patrol default OFF/ON code(Buzzer: OFF:Long Beep, ON:Short Beep)Press continously for 15sSETTransmit Patrol demo code(Buzzer: OFF:Long Beep, ON:Short Beep)SETTransmit ECO demo code(Buzzer: OFF:Long Beep, ON:Short Beep)SETTransmit check code(Buzzer:Short Beep)