Panasonic CF-VDW07CH Operating Instructions Manual

Also see for CFVDW07CH - WIRELESS LCD DISPLAY: Supplementary instructions

Panasonic CF-VDW07CH Operating Instructions Manual Manual pdf 39 page image

39EN o d i s p l a y a f t e rpowering onAn afterimage appears“Connection timeout” isdisplayed“No server found” isdisplayed“Authentication failed” isdisplayed“Too many clients” isdisplayedTroubleshootingHas the computer or wireless display been set to thepower-saving mode?To resume operation of your computer from thecondition the power of the display is off (for energyconservation purposes), touch the screen.If an image is displayed for a prolonged period of time,an afterimage may appear. Set the screensaver.Confirm the IP address, subnet mask, network type,and SSID settings on both the computer and thewireless display.Confirm the operation of the wireless LAN on thecomputer.The wireless LAN on the computer side is compatiblewith 802.11b and 802.11g, but if there is a possibilityof interference from other devices on the network, setthe computer’s wireless LAN to 802.11b only.If your computer and the wireless display do not poweroff normally due to a reason such as a network error, itmay take two or three minutes to reconnect.Wait for a moment, then connect again.Put the wireless display close to the computer.Confirm that is on the taskbar.Confirm the IP address of the computer that has beenset on the wireless display.Confirm the password for both the computer and thewireless display.Disconnect the wireless display during operation andreestablish the connection.When a problem occurs, refer to this page. If a problem appears to be related to a softwareapplication, read the software related manual. If you still cannot troubleshoot the problem,contact Panasonic Technical Support.(To next page)