Panasonic CF-VDW07CH Operating Instructions Manual

Also see for CFVDW07CH - WIRELESS LCD DISPLAY: Supplementary instructions

Panasonic CF-VDW07CH Operating Instructions Manual Manual pdf 35 page image

35EYou can set the wireless display properties as follows.1 Select [Wireless Display Setup Utility] in the followingprocedure.Windows XP[start] - [All Programs] - [Panasonic] - [Wireless DisplaySetup Utility]Windows 2000[Start] - [Programs] - [Panasonic] - [Wireless DisplaySetup Utility]2 Enter the Supervisor Password.The Supervisor Password is not set at the time of the pur-chase.Press the Menu button, select [Option], then set the Su-pervisor Password. ( page 33)3 Set the wireless display settings, TCP/IP and WEP.You can set them for each profile.Wireless Display Setup UtilityChanging the Wireless Display SettingsChange the profile name.Change AES Encryption.[Disable]>Select [Key], and set AES Key using phrase or binary,then select [OK].Change WEP Encryption.Select [Key(s)], and set WEP Key(s), then select [OK].When [Network Type] is set to [Infrastructure] and [WEP]is set to [64 bits] or [128 bits], the check mark can beadded for or removed from [Shared Key Authentication].When removing the check mark from [Shared KeyAuthentication]:“Open mode” is enabled.When adding the check mark for [Shared Key Au-thentication]:“Shared mode” is enabled.After finalizing the settings, select [Next], then select [OK].(If another screen is displayed after selecting [OK], se-lect [OK].)When adding the checkmark here, the MeiWDSprofile setting (one profileonly), such as the pass-word or AES Encryption,is also set to the computerconnected to the wirelessdisplay.