|
38ENo 016Total 038Capturing the ScreenCapture ButtonIf you want to playback the currently displayed screen later,you can save the screen data onto the memory (up to 100images)*1.*1 The number of the data that can be saved is different accordingto the image.Press Capture button.The currently displayed screen is saved, and is added at theend of the already-saved images.Displaying Saved ImagesMenu Button1 Press Menu button.2 Select [General] - [OfflineView], thenselect [OK].The saved image and the following panel will bedisplayed. Displaying the previousimage (high-speed mode)Image numberThe number of images savedDelete the image dataDisplaying the next image(high-speed mode)Displaying the next image(The same operation is possible by pressing theCapture button.)Displaying the previous image(The same operation is possible by pressing the R-Button.)When the power is cut by an operation other than pressing the power switch (e.g.,when the wireless display is running on battery and the battery is inadvertentlytaken out, or when the AC adaptor is accidentally pulled out from the power outletand no battery is in the wireless display), all saved images are lost.Only the screen image is displayed, and operations such as input and selectioncannot be performed on the screen.To close an image that has been saved and display the previous screen:1 Press Menu button.2 Select [General] - [Connect], then select [OK].Delete<< >>< >Moving to the four cor-ners of the screenNOTE
PreviousNext |