33EOption MenuBy selecting [Option], you can establish the individual settings for the wireless display.General Wireless Battery Option Version100% Excellent OK CancelDefault settingsChange the password that is input torun the wireless display.Set the resume function to [Normalresume] or [Quick resume], then se-lect [OK].Normal Resume:The wireless connection is dis-abled during display off.Quick Resume:Only the screen is turned off dur-ing display off.If there is no input from thetouchscreen or button for a certain in-terval of time, the display may beturned off.Set the interval of time to [30 sec],[1 min], [2 min], [5 min], [10 min],[20 min], [30 min] or [disable], thenselect [OK].Wireless Connection : SetupPower on Password : ChangeSupervisor Password : ChangeTouchscreen : CalibrationLCD Off Timer : 30 minLCD Off Mode : Normal resumePower Off Timer : disableSet or change the Super-visor Password.Change the settings of the wirelessconnection in the following proce-dure.1 Select [Setup].Enter the Supervisor Password,then select [Enter].2 Select the profile that has been seton the following screen, then se-lect [OK].3 Set the network by the same pro-cedure as 3 , 4 and 5 of “Setupthe Wireless Display” ( page19).Select profile.Profile 1 Profile 2Profile 3 Profile 4If there is no input from thetouchscreen or button for a certain in-terval of time, the power may beturned off.Set the interval of time to [30 sec],[1 min], [2 min], [5 min], [10 min],[20 min], [30 min] or [disable], thenselect [OK].This screen is a sample.