Panasonic BB-HCM527 Installation Manual

Also see for BB-HCM527: Comparison chart Specifications Important information Setup guide Important information

Contents

Panasonic BB-HCM527 Installation Manual Manual pdf 1 page image

1Installation GuideNetwork Camera (PoE Ready)• This manual is written for both the BB-HCM527 (Indoor Use Only) and the BB-HCM547 (Outdoor Ready). Available features and operations varyslightly depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.• Model number suffixes (“A” and “CE”) are omitted from the following model numbers shown in this document, unless necessary.BB-HCM527A, BB-HCM527CE, BB-HCM547A, BB-HCM547CEPlease read the included Important Information before proceeding.Complete Operating Instructions and all other documentation can be found on the included CD-ROM.Model No. BB-HCM527BB-HCM547Indoor Use OnlyOutdoor ReadyInstallation Procedure OverviewThe following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.Preparation1. Confirm the following items are included in the camera’s packaging.BB-HCM527 OnlyBB-HCM547 Only2. You will need the following additional items to install and configure the camera.PreparationConfirm that you have all theitems required forinstallation.Camera DiagramMake sure you know thenames of the camera’sphysical features.ConnectionsConnecting the camera toyour network and to the poweroutlet.SetupSetting up the camera (described in the includedSetup Guide). This involves configuring the cameraso that it can be accessed from a PC.MountingMounting or placing thecamera. For BB-HCM547:See the Mounting Guide.Main Unit (1 pc.) Washer A (1 pc.)Order No. XWG4F16VWUsed when securing the safetywire to the ceiling.Safety Wire (1 pc.)Order No. PQME10080ZUsed to secure the camera whenmounting it.Important Information (1 pc.)Installation Guide (this document) (1 pc.)Setup Guide (1 pc.)Mounting Guide (1 pc.) [BB-HCM547 only]Stand-alone SD Memory Card Recording Guide (1 pc.)Setup CD-ROM (1 pc.)Order No. PNQC1048ZContains the Setup Program needed to configure the camera,as well as the camera’s documentation.**See the included Important Information for a description of each document.Ceiling Mounting Cover (1 pc.)Order No. PQKL10090Z1Used when mounting the camera ona ceiling.Screw A (6 pcs.)Order No. XTB4+20AFJUsed to secure the ceiling plate(3 pcs.) and the safety wire (1 pc.) tothe ceiling, and used to secure theceiling plate and the camera(2 pcs.).Screw B (1 pc.)Order No. XTB26+10GFJUsed for connecting the safety wireto the camera.Washer B (1 pc.)Order No. XWG26D12VWUsed when securing the safety wire to the camera.Ceiling Plate (1 pc.)Order No. PQMD10111ZUsed to secure the camera to the ceiling.Ceiling MountingCover (1 pc.)Order No.PNKV1021Z1Used when mountingthe camera on a ceiling.Screw A (2 pcs.)Order No.XTB4+20AVWUsed to secure theceiling plate and thecamera.Screw B (9 pcs.)Order No.XYN3+C8VWUsed to secure thesafety wire and thecamera (1 pc.) andused to secure theceiling plate and theinner cover (8 pcs.).Screw C (8 pcs.)Order No.XTB4+35AVWUsed to secure thebase cover(3 pcs.) and the camera(4 pcs.) to the ceiling,and used to secure thesafety wire and theceiling plate(1 pc.).Washer B (1 pc.)Order No. XWG3E10VWUsed when securing the safety wireto the camera.Ceiling Plate (1 pc.)Order No. PNZMHCM527AUsed to secure the camera tothe ceiling, and protect fromwater.Base Cover (1 pc.)Order No. PNZC2HCM527AUsed to secure the camera tothe ceiling, and protect fromwater.Inner Cover (1 pc.)Order No. PNZC1HCM527AUsed to protect the camera from water.Form Strip (1 pc.)Order No. PQHG10748ZUsed to protect the camera fromwater.Self Bonding tape (1 pc.)Order No. PSHG1235ZUsed to protect the camerafrom water.– a PC (see the system requirements in the Important Information document) – a LAN cable (CAT-5 straight cable)– a router© Panasonic System Networks Co., Ltd. 2008PQQX16400YA KK0608CM1020Please read this document before using the product, and save this document for futurereference. Panasonic Network Camera Website:http://panasonic.net/pcc/ipcam/• This document (Installation Guide) explains how to physically connect thecamera to the power supply and network, as well how to mount or place thecamera for regular use.• The Setup Guide describes how to set up the camera so that it can beaccessed using a PC.• For BB-HCM547: The Mounting Guide explains how to mount or place thecamera for regular use.• Refer to the Operating Instructions on the CD-ROM for details regardingthe camera’s features.• Refer to the Troubleshooting Guide on the CD-ROM if you have anyproblems configuring or using the camera.• The Stand-alone SD Memory Card Recording Guide describes how torecord images to an SD memory card without using a PC.• The camera illustrations in this document depict the BB-HCM547.Abbreviations• UPnP is the abbreviation for “Universal Plug and Play”.• The Network Camera is referred to as “the camera” in this document.• The Setup CD-ROM is referred to as “the CD-ROM” in this document.

/ 4

Related manuals for Panasonic BB-HCM527