Panasonic BB-HCM511CE Installation Manual

Also see for BB-HCM511: Comparison chart Brochure Important information

Contents

Panasonic BB-HCM511CE Installation Manual Manual pdf 1 page image

1• This document (Installation Guide) explains how to physically connect thecamera to the power supply and network, as well how to mount or place thecamera for regular use.• The Setup Guide describes how to set up the camera so that it can beaccessed using a PC.• Refer to the Operating Instructions on the CD-ROM for details regardingthe camera’s features.• Refer to the Troubleshooting Guide on the CD-ROM if you have anyproblems configuring or using the camera.• The illustrations used in Installation Guide are of BB-HCM531.Abbreviations• UPnP is the abbreviation for “Universal Plug and Play”.• The Network Camera is referred to as “the camera” in this document.• The Setup CD-ROM is referred to as “the CD-ROM” in this document.Installation GuideNetwork Camera (PoE Ready)This manual is written for the BB-HCM511 (Indoor Use Only), BB-HCM515 (Indoor Use Only) and the BB-HCM531 (Outdoor Ready). Available featuresand operations vary slightly depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front ofthe camera.Please read the included Important Information before proceeding.Complete Operating Instructions and all other documentation can be found on the included CD-ROM.Model No. BB-HCM511BB-HCM515BB-HCM531Indoor Use OnlyIndoor Use OnlyOutdoor ReadyInstallation Procedure OverviewThe following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.Preparation1. Confirm the following items are included in the camera’s packaging.2. You will need the following additional items to install and configure the camera.OptionYou can also connect the camera using the optional Panasonic BB-HCA3CE or BB-HCA3E AC Adaptor. The optional AC Adaptor includes the following items.• The AC adaptor, the AC adaptor cord, and the AC cord are not waterproofed, and are intended for indoor use only. The AC adaptor, the AC adaptor cord, andthe AC cord must be waterproofed for outside use.Camera DiagramPreparationConfirm that you have all theitems required forinstallation.Camera DiagramMake sure you know thenames of the camera’sphysical features.ConnectionsConnecting the camera toyour network and to the poweroutlet.SetupSetting up the camera (described in the includedSetup Guide). This involves configuring the cameraso that it can be accessed from a PC.MountingMounting or placing thecamera.Main Unit (1 pc.) Washer S (1 pc.)Order No. XWG26D12VWUsed when securing the safetywire to the camera.Screw ABB-HCM511/BB-HCM515 (1pc. for the safety wire)Order No. PQHV2610PJ65BB-HCM531 (1pc. for the safety wire,4pcs. for the connector cover)Order No. XTN26+10GVWFlexible Stand (1 pc.)Order No. PQKL10082Z1Washer L (1 pc.)Order No. XWG4F16VWUsed when securing the safetywire to the ceiling or wall.Screw B (1pc. for the safety wire,3pcs. for the flexible stand)Order No. XTB4+20AFJSafety Wire (1 pc.)Order No. PQME10080ZUsed to secure the camerawhen mounting it.Important Information (1 pc.)Installation Guide(this document) (1 pc.)Setup Guide (1 pc.)Setup CD-ROM (1 pc.)Order No. PNQC1048ZContains the Setup Program needed to configure thecamera, as well as the camera’s documentation.**See the included Important Information for a description of eachdocument.Sunshade (1pc.)[BB-HCM531 Only]Order No. PQKV10074Z1Connector Cover (1pc.)[BB-HCM531 Only]Order No. PQYCHCM531AFoam Strip (1pc.)[BB-HCM531 Only]Order No. PQHG10748ZSelf Bonding Tape (1pc.)[BB-HCM531 Only]Order No. PSHG1235Z– a PC (see the system requirements in the Important Information document) – a LAN cable (CAT-5 straight cable)– a routerBB-HCA3CE: For use in countries/areas other than the United Kingdom BB-HCA3E: For use in the United KingdomAC Adaptor (1 pc.)Cord Length:About 3 mAC Cord (1 pc.)Cord Length:About 1.8 mAC Adaptor (1 pc.)Cord Length:About 3 mAC Cord (1 pc.)Cord Length:About 1.8 mFront View Side and Bottom View Rear ViewABCDLens coverLensMicrophoneIndicator *1EFGHIFACTORY DEFAULTRESET buttonSD memory card slotRESTART buttonFUNCTIONbutton/indicatorStand/tripod mountingholeJKLMNOPQRSSafety wire holeStand mounting holeSerial number andMAC address labelAC adaptor cord/video cable hookSpeaker/microphone cable hookLAN portDC IN jackExternal I/O interfaceVIDEO OUT terminalAUDIO OUT terminal*1 See 1.1 Understanding the Camera Indicator in the Troubleshooting Guide on the CD-ROM for indicator meaning. T MIC terminalABCDEFGHIJKLMNOP Q R S T© Panasonic System Networks Co., Ltd. 2007PQQX16014WA KK0207CM3020 (CE)Please read this document before using the product, and save this document forfuture reference.• This document can be found on the included CD-ROM. English, French, German, Italian,Spanish, Russian, Simplified Chinese, Korean, Danish and Swedish versions are included.

/ 4

Related manuals for Panasonic BB-HCM511