Panasonic AK-HRP1000G Operating Instructions Manual

Also see for AK-HRP1000G: Operating guide Operating instructions Operation guide Operating guide Operating guide

Contents

Panasonic AK-HRP1000G Operating Instructions Manual Manual pdf 25 page image

Front panel 5128741 11 10963 521 [ND] indicator This indicator indicates the ND filter setting status.Status displaysLit green: Standard position set in the ROP menu.Lit Orange: Updated from the standard position set in the ROP menu.n The standard position of the ND filter can be set in [ROP SETTING] > [STD POSITIONND] in the ROP menu.“STD POSITION ND” (see page 112)2 [ND] setting buttons Use the up and down buttons to select the ND filter setting.When [HEAD] button offChanges the ND filter setting.When [HEAD] button litOnly displays the ND filter position. (Switching is not possible.)“ND filter” (see page 39)3 [ND] display This displays the ND filter position.4 [CC] indicator This indicator indicates the CC filter setting status.Status displaysLit green: Standard position set in the ROP menu.Lit Orange: Updated from the standard position set in the ROP menu.n The standard position of the CC filter can be set in [ROP SETTING] > [STD POSITIONCC] in the ROP menu.“STD POSITION CC” (see page 112)5 [CC] setting buttons Use the up and down buttons to select the CC filter setting.When [HEAD] button offChanges the CC filter setting.When [HEAD] button litOnly displays the CC filter position. (Switching is not possible.)“CC filter” (see page 40)When [ECC] button litWhen [ROP SETTING] > [ECC BTN CTRL] is set to “VAR” in the ROP menu, you can con-figure the [ECC] > [COLOR TEMP] values in the ROP menu.“COLOR TEMP” (see page 74)When [ROP SETTING] > [ECC BTN CTRL] is set to “MEM” in the ROP menu, the settingvalues registered to memory presets A to E in the [ECC] menu are recalled.The recalled memory preset appears on the [CC] display.In this state, the display will remain as the recalled memory preset, even if the [ECC] >[COLOR TEMP] settings in the ROP menu are changed.6 [CC] display This displays the CC filter position.7 [HEAD] button Use this button to enable filter control on the camera side.The [HEAD] button also lights when the camera's [FILTER LOCAL] switch is pressed and lit.Status displaysOn: Filter control enabled on the camera sideOff: Filter control enabled on the ROP (this unit) side8 [ECC] button When this button is lit, [ECC] > [COLOR TEMP SW] in the ROP menu can be enabled or dis-abled.“Color temperature (ECC)” (see page 41)Status displaysOn: ECC operation ([COLOR TEMP SW] enabled)Off: CC filter operation ([COLOR TEMP SW] disabled)- 25 -Parts and their functions