Panasonic AK-HRP1000G Operating Instructions Manual

Also see for AK-HRP1000G: Operating guide Operating instructions Operation guide Operating guide Operating guide

Contents

Panasonic AK-HRP1000G Operating Instructions Manual Manual pdf 19 page image

Parts and their functionsFront panel 11 2 3 4 5 6 78 9 10 11 12 131 [POWER HEAD] button Use this button to control camera power remotely. However, it will not function unless the CCUand the camera are turned on.Each press of the button turns the power of the camera on or off.Status displaysOn (green): The camera is turned on.On (red): The camera is turned off.Flashing (red): The camera has been turned off from the unit.Off: When the camera is not connectedn When the camera is powered from an external DC power supply, the button lights greenand the camera power supply cannot be remotely controlled from this unit.2 [POWER VF] button Use this button to control the viewfinder power remotely.When the camera is turned on by the unit, the viewfinder is also turned on.Each press of the button turns the power On (power on) and Off (power off).Status displaysOn (green): Both the camera and viewfinder are On.Off: The viewfinder has been turned off from the unitn On/off operation for the viewfinder cannot be performed if the power on the viewfinder isturned off.3 [BARS/TEST] button Use this button to output the CCU color bar signal from the camera video output on the CCUrear panel.To select a CCU color bar type, select [SYSTEM CCU] > [BARS HD] or [BARS SD] in theROP menu.“BARS HD” (see page 106)“BARS SD” (see page 106)When the video signal is a camera signal or a color bar signal, press and hold the[BARS/TEST] button to select the TEST signal. To switch from TEST signal output, pressthe [BARS/TEST] button to select camera video output.Status displaysOn (yellow): CCU color bar OnOn (green): TEST signal OnOff: Camera video4 [REF. RECALL] button Press and hold this button to recall the reference setting information (reference file) of thecamera.Assign the user file and factory file under [SYSTEM CAM] > [REF. RECALL] of the ROPmenu.“REF.RECALL” (see page 104)Status displaysOn: RecallingOff: Recall complete- 19 -Parts and their functions