Panasonic AJ-DE97P Operating Instructions Manual

Also see for AJ-DE97P: Installation manual

Contents

Panasonic AJ-DE97P Operating Instructions Manual Manual pdf 6 page image

– 6 –Parts and Their FunctionsFront Panel1 Main unit power switchSet this switch to the OFF position after quitting thesystem. If the power is turned off while the harddisk drive is operating, data may be lost or the drivemay be damaged.Do NOT turn off the power while white characterson a blue background appear on the monitordisplay (for the personal computer) during startup.2 Main unit power LED3 HDD sub switchPress this switch if PC unit’s power does not comeon even when the main unit power switch is set toON.Do not press this switch without good reason sincethe power of the PC unit will be turned off if itpressed while the power is supplied.4 HDD reset switchPress this switch when the PC unit is not operatingproperly. The start screen will now be restored,and checks on the operation can be carried out.Do NOT press this switch while white characters ona blue background appear on the monitor display(for the personal computer) during startup.5 Phones jackThe sound can be monitored when stereoheadphones are connected to this jack.6 Phones volume controlThis is used to adjust the headphones volume andthe monitor output volume.7 Mic jackThe microphone is connected here for voice-overediting operations.8 Mic volume controlThis is used to adjust the level at which themicrophone sound is input.9 Cassette slotM cassettes or L cassettes are loaded through thisslot. Consumer-use cassettes cannot be used forrecording or playback.: Cassette tape EJECT button.When this button is pressed, the tape is unloaded,and the cassette is automatically ejected severalseconds later.; CD-ROM drive< Tray OPEN/CLOSE button= Floppy disk drive> Carrying handle? HDD access display lamp (system)@ HDD access display lamp (AV data)A Screws for securing mechanismLoosen these screws when cleaning the headmechanism transport system of the VTR unit orwhen conducting other kinds of servicing ormaintenance. It will then be possible to pull out theVTR unit’s mechanism.After the maintenance work has been completed orwhen the unit is to be moved, the mechanism mustbe put back inside the unit and the screwstightened up securely.9658=4?@73;2:A>1<