Panasonic AJ-DE97P Operating Instructions Manual

Also see for AJ-DE97P: Installation manual

Contents

Panasonic AJ-DE97P Operating Instructions Manual Manual pdf 20 page image

– 20 –If you believe that something is wrong with your product, take the time to check whether the product has beenoperated incorrectly before asking a service engineer to conduct repairs.1. Self-diagnosis test for main unitThe main unit’s basic test is automatically conducted when its power switch is set to the ON position. Whenthis test is completed without error, a beep will sound once.If trouble has been detected, the beep will sound two or more times. In a case like this, the product may havebeen installed improperly or a hardware error may be to blame.2. Basic checksCheck out the following points.1) Has the power cable been fully plugged into both the main unit and power outlet?2) Have the power switches of the main unit, personal computer’s monitor and monitor (Video) for monitoringthe pictures all been turned on?O Are the power lamps on all the units lighted?3) Is the personal computer’s monitor connected properly to the main unit?Connect the monitor to the SVGA-I/F connector L on page 11 of Parts and Their Functions.(For details on the monitor connections, refer to page 13.)4) Have the accessories been connected properly to the rear panel connectors?(See page 12)O Included among the accessories are the keyboard and mouse.O The connectors for the keyboard and mouse have the same shape. Is the keyboard connected to themouse connector and is the mouse connected to the keyboard connector?5) Have the contrast and brightness of the personal computer’s monitor and monitor (Video) for monitoring thepictures been adjusted?O If no display appears, faulty adjustments may be to blame.6) Has the system been started up with a floppy disk already inserted in the floppy disk drive?O When the main unit’s power switch is set to the ON position with a floppy disk already inserted in thefloppy disk drive, the main unit will attempt to start up the system from the floppy disk drive, resulting in astartup failure.3. Check out the Troubleshooting ChartIf the symptom persists even after the basic checks have been carried out, check the “Suggested remedialaction” for the symptom concerned on the following Troubleshooting Chart.If the trouble still persists, contact your dealer.Troubleshooting