Panasonic ACXF60-03410 Installation Manual

Also see for ACXF60-03410: Installation manual

ACXF60-03410SAFETY PRECAUTIONS• Read the following “SAFETY PRECAUTIONS” carefully before installation.• Electrical work must be installed by a licensed electrician.• The caution items stated here must be followed because these important contents are related to safety. The meaningof each indication used is as below.Incorrect installation due to the non-observance of the instructions will cause harm or damage, and the seriousness isclassified by the following indications.• Perform a functional test to confirm that no abnormality occurs after the installation. Then, explain the operation,care and maintenance to user as stated in instructions. Please remind the customer to keep the operatinginstructions and installation instruction for future reference.ATTACHED ACCESSORIESWARNING This indication shows the possibility of causing death or serious injury.CAUTION This indication shows the possibility of causing injury or damage to properties only.The items to be followed are classified by the symbols:Symbol with white background denotes item that is PROHIBITED from doing.Symbol with dark background denotes item that must be carried out.Wired Remote Controller Installation ManualWARNINGDo not modify the length of the remote controller cable. Otherwise, it will cause fire or electrical shock.Be sure to turn off the main power before installing and connecting the remote controller. Otherwise, it willcause electrical shock.Engage an authorized dealer or specialist for installation. If installation done by the user is defective, it willcause electrical shock or fire.Install strictly according to these installation instructions. If installation is defective, it will cause electrical shockor fire.Use specified accessories and parts for installation. Otherwise, it will cause the set to fall, fire or electricalshock.For electrical work, follow the local national wiring standards and regulations, and these installationinstructions. Otherwise, it will cause electrical shock or fire.Wire routing must be properly arranged so that control board cover is affixed properly. If control board cover isnot affixed perfectly, it will cause fire or electrical shock.If passing the remote controller cable through a wall, be sure to install a water trap above the cable.Otherwise, it will cause electrical shock.CAUTIONDo not touch the sharp aluminium fin of air conditioner unit during wired remote controller installation, sharpparts may cause injury.Install on a flat surface to avoid warping of remote controller, or else damage to the LCD case or operationproblems may result.Avoid installing the remote controller cable near refrigerant pipes or drain pipes, otherwise it will causeelectrical shock or fire.Install the remote controller cable at least 1 31/32"(5cm) away from electric wires of other appliances to avoidmisoperation (electromagnetic noise).Be sure to use only the accessory screws to avoid damage of remote controller PCB.No. Name Qty Diagram Remark1 Remote controller 12 Remote controller cable 1 Length 32.8ft (10m)3Screw(M4 machine pitched - 1 3/16"30mm))3 Installing the remote controller to an outlet box(embedded cable)4 Screw(M4 self tapping - 9/16"(14mm)) 3 Installing the remote controller to the wall(exposed cable)

/ 3

Related manuals for Panasonic ACXF60-03410