Ochsner AIR 7 Operating And Installation Manual

Contents

Ochsner AIR 7 Operating And Installation Manual Manual pdf 26 page image

INSTALLATION | Appliance installation26 www.ochsner.com | 982000-AIR-M2-M4-EN03.111_02_200_214_01_002Material damageWhen being transported with the appliance cas-ing disassembled, sensitive components will beexposed.» Take care transporting the appliance.10.1.2 Positioning the appliance» Position the appliance at the intended installationlocation.» Use the pre-installed transport aids (2 lifting slings atthe front and 2 lifting handles at the rear) to slide andtilt the appliance.» Observe minimum clearances.» Ensure the appliance is horizontal. To compen-sate for minor unevenness in the floor, use the fourheight-adjusting plastic glides on the underside of theappliance.i InformationOn the underside of the indoor unit, there are fourplastic glides with rubber mounted threaded pins(without nuts). Discrepancies in floor height of upto 6 mm can be compensated for.11_02_200_214_01_0031 2 31 Lifting sling2 Mounting bolt3 Appliance frame» After the appliance has been placed in position,remove the two lifting slings at the front of theappliance.» Undo and remove the two mounting bolts and removethe two lifting slings.» Then screw the two mounting bolts back into the ap-pliance frame.10.1.3 Disassembling the appliance casing11_02_200_214_01_006» Undo and remove the four knurled screws for the ap-pliance casing panel at the rear of the appliance.» Undo and remove the two fixing screws for the controlbox cover, on the rear of the appliance.11_02_200_214_01_007» Slide back the control box cover. Lift the control boxcover up and away.