67H.264 4/8/16-channel Networkable DVRsNOTE When you select the ALARM option, it is necessary to set the motion detection sensitivity and area. Please refer to “7.6.7 MotionDetection” on page 76. Configure the alarm triggering settings before selecting alarm recording.To restore to default settings, scroll to the “back” button in the lower right corner of the window, then press ENTER.To save the new settings, scroll to the “check” button in the lower right corner of the window, then press ENTER.7.4 VideoMove the cursor to VIDEO (the icon will be highlighted when selected), then press ENTER to enter the video menu. You can use thedirection keys and cursor to change the options.7.4.1 Video ChannelSelect the channel to setup.7.4.2 NameYou can assign a name to each channel. The channel name can be up to 9 characters in length.7.4.3 PositionYou can set the position where the channel name appears in the view window. Press ENTER to switch from U-L, D-L, U-R, D-R andOFF.SECTION 7: DVR SYSTEM MENUS
