21H.264 4/8/16-channel Networkable DVRs3. Click the q icon at the right end of the USER NAME line. From the dropdown list, select Admin.4. Click the OLD PASSWORD entry field, then enter the current Admin password using the virtual keyboard.5. Enter both the NEW PASSWORD and CONFIRM PASSWORD fields with a different password. Passwords cannot be morethan 6 digits in length.6. Click the confirm icon (a) in the lower right corner of the screen, then click the Confirm button in the Note window.7. Repeat steps 3, 4, 5, and 6 above to change the user1 password.3.2.3 Add users to the system1. On the SYSTEM tab USER line, click the >> icon to open the USER MANAGEMENT window.2. In the USER MANAGEMENT window, click the >> icon on the ADD USER line.3. Click the entry field on the USER NAME line to open a virtual keyboard. Click the letters and numbers to enter a username,then click the = icon to close the keyboard.4. Enter both the PASSWORD and CONFIRM PASSWORD fields with a password for the user. Passwords cannot be more than6 digits in length.5. Click the confirm icon (a) in the lower right corner of the screen, then click the Confirm button in the Note window.6. Press the MENU button on the front panel or right click on the desktop to return to the USER MANAGEMENT window.7. In the USER MANAGEMENT window, click the >> icon on the SET PERMISSIONS line.SECTION 3: DVR SETUP
