OHAUS TAJ Series Quick Start Manual

Contents

OHAUS TAJ Series Quick Start Manual Manual pdf 1 page image

Quick Start Guide TAJ SeriesOhaus Corporation www.ohaus.com i TAJ Carat & Gold Series Quick Start GuidePREPARATION FOR USEInstall Pan, Release LocksInstall the metal pan over the sub-platform.Before using the scale, release theTransportation Lock. On the scale bottom,slide the locking pin to the position.Calibration Lock: to change, see InstructionManual. (Otherwise leave as is.)Check PowerVoltage rating on scale’s power adapter mustmatch local line voltage. If not, contact anOhaus dealer. To use battery power, removebattery cover and insert LR6 (AA) batteries.Set Draft Shield (Carat models – see page 3.)SELECTING THE LOCATIONPlace on a firm, steady surface.Avoid locations with excessive air current,vibrations, heat sources, or rapid temperaturechanges.Level the scale: Adjust leveling feet so bubbleis centered.SAFETY PRECAUTIONSFor safe and dependable operation of this product, please comply with the followingsafety precautions:• Verify that the input voltage printed on the power Adapter and the plug type matchesthe local power supply.• Make sure that the power cord does not pose an obstacle or tripping hazard.• Disconnect the product from the power supply when cleaning.• Do not operate this product in hazardous or unstable environments.• Do not drop loads on the pan.• Use only approved accessories and peripherals, as available.• Operate the product only under ambient conditions specified in the Instruction Manual.• Service should be performed by authorized personnel only.TransportationLockLevelingBubblePower Input JackRemoveBatteryCover toinsertBatteries:LR6 (AA).LevelingFeetCalibrationLockCommunicationInterfacecompartment(See page 3.)

/ 4

Related manuals for OHAUS TAJ Carat Series