OHAUS T51P Instruction Manual

Also see for T51P: Quick start guide Service manual Instruction manual User guide

OHAUS T51P Instruction Manual Manual pdf 33 page image

EN-32 5000 Series IndicatorsReset No, YesStable Only Off, OnAuto Print Off,On Stable (-> Load, Load and Zero),Interval (-> 0…3600), Continuous,On AcceptPrint Content Result (-> Off, On, Numeric only),Gross (-> Off, On),Net (-> Off, On),Tare (-> Off, On),Header ( ->Off, On),User ID (-> Off, On),Project ID (-> Off, On),Scale ID (-> Off, On),Difference (-> Off, On),Date and Time (-> Off, On),Information (-> Off, On),Application Mode ( Off, On),Name (-> Off, On),Layout Format (-> Multiple, Single),Feed (-> Line feed, 4 Line feed, Formfeed)List No, YesEnd Print1 Exit PRINT1 menu(End Print2) Exit PRINT2 menu3.9.1 ResetSet the Print menu to factory defaults.NO = not reset.YES = reset.3.9.2 Print Stable Data OnlySet the print criteria.OFF = values are printed immediately.ON = values are only printed when the stability criteria are met.3.9.3 Auto PrintSet the automatic printing functionality.OFF = disabled.ON.StAb = printing occurs each time the stability criteria are met.INtEr = printing occurs at the defined interval.CONt = printing occurs continuously.3.9 Print1 and Print2 MenusEnter this menu to define printing parameters. Default settings are bold.NOTE: The Print2 menu is only displayed if a second interface(RS232 or RS422/RS485) is installed.NOTE: If the Legal for Trade menu item is set to ON, the followingsettings are not reset: Stablewww. GlobalTestSupply .comFind Quality Products Online at: sales@GlobalTestSupply.com