OHAUS Ranger RP Instruction Manual

OHAUS Ranger RP Instruction Manual Manual pdf 46 page image

Ranger RP46Settings in the menu4.7 Diagnosis and printing out of the menu settings (DIAGNOS)tESt SCInternal Testing scale with internal calibration weight• -Int CAL- appears in the display during the test.• After completion of the test, ideally *d=0.0g briefly appears in the display, afterwhich the scale changes to the next menu item KboArd.External Testing scale with external calibration weight1. The scale checks the zero point. -0- appears in the display. The test weightflashes in the display.2. If necessary, change the weight value displayed with No.3. Put the calibration weight on the scale and confirm with Yes.4. The scale checks the calibration weight put on them.5. After the test is completed, the deviation from the last calibration briefly appearsin the display, ideally *d=0.0g, after which the scale changes to the next menuitem KboArd.KboArd Keyboard testPUSH 1 ... 25 • Press the keys in the following order:If the key works, the scale changes to the next key.NoteYou cannot abort the keyboard test!If you have selected the menu item KboArd, you must press all keys.dISPLAY Display test: The scale displays all functioning segmentsSNr Display of the serial numberSNr2 Display of the serial number of scale 2. This menu item only appears if an analogsecond scale is connected.LiSt Printout of a list of all menu settingsLiSt2 Printout of a list of all menu settings of scale 2. This menu item only appears if ananalog second scale is connected.LiSt.M Printout of a list of all values and settings in the memory