Important InformationWarrantyThe National Instruments VXIpc 800 Series embedded computers and accessories are warranted against defects inmaterials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or otherdocumentation. National Instruments will, at its option, repair or replace equipment that proves to be defective duringthe warranty period. This warranty includes parts and labor.The media on which you receive National Instruments software are warranted not to fail to execute programminginstructions, due to defects in materials and workmanship, for a period of 90 days from date of shipment, as evidencedby receipts or other documentation. National Instruments will, at its option, repair or replace software media that donot execute programming instructions if National Instruments receives notice of such defects during the warrantyperiod. National Instruments does not warrant that the operation of the software shall be uninterrupted or error free.A Return Material Authorization (RMA) number must be obtained from the factory and clearly marked on the outsideof the package before any equipment will be accepted for warranty work. National Instruments will pay the shippingcosts of returning to the owner parts which are covered by warranty.National Instruments believes that the information in this manual is accurate. The document has been carefullyreviewed for technical accuracy. In the event that technical or typographical errors exist, National Instruments reservesthe right to make changes to subsequent editions of this document without prior notice to holders of this edition. Thereader should consult National Instruments if errors are suspected. In no event shall National Instruments be liable forany damages arising out of or related to this document or the information contained in it.E XCEPT AS SPECIFIED HEREIN , N ATIONAL I NSTRUMENTS MAKES NO WARRANTIES , EXPRESS OR IMPLIED , ANDSPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE .C USTOMER ’ S RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEGLIGENCE ON THE PART OF N ATIONALI NSTRUMENTS SHALL BE LIMITED TO THE AMOUNT THERETOFORE PAID BY THE CUSTOMER . N ATIONAL I NSTRUMENTSWILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA , PROFITS , USE OF PRODUCTS , OR INCIDENTAL ORCONSEQUENTIAL DAMAGES , EVEN IF ADVISED OF THE POSSIBILITY THEREOF . This limitation of the liability of NationalInstruments will apply regardless of the form of action, whether in contract or tort, including negligence. Any actionagainst National Instruments must be brought within one year after the cause of action accrues. National Instrumentsshall not be liable for any delay in performance due to causes beyond its reasonable control. The warranty providedherein does not cover damages, defects, malfunctions, or service failures caused by owner’s failure to follow theNational Instruments installation, operation, or maintenance instructions; owner’s modification of the product;owner’s abuse, misuse, or negligent acts; and power failure or surges, fire, flood, accident, actions of third parties,or other events outside reasonable control.CopyrightUnder the copyright laws, this publication may not be reproduced or transmitted in any form, electronic or mechanical,including photocopying, recording, storing in an information retrieval system, or translating, in whole or in part,without the prior written consent of National Instruments Corporation.TrademarksCVI ™ , LabVIEW ™ , MANTIS ™ , MITE ™ , NI-488.2 ™ , NI-VISA ™ , NI-VXI ™ , TNT ™ , and VXIpc ™ are trademarks ofNational Instruments Corporation.Product and company names listed are trademarks or trade names of their respective companies.WARNING REGARDING MEDICAL AND CLINICAL USE OF NATIONAL INSTRUMENTS PRODUCTSNational Instruments products are not designed with components and testing intended to ensure a level of reliabilitysuitable for use in treatment and diagnosis of humans. Applications of National Instruments products involvingmedical or clinical treatment can create a potential for accidental injury caused by product failure, or by errors on thepart of the user or application designer. Any use or application of National Instruments products for or involvingmedical or clinical treatment must be performed by properly trained and qualified medical personnel, and all traditionalmedical safeguards, equipment, and procedures that are appropriate in the particular situation to prevent serious injuryor death should always continue to be used when National Instruments products are being used. National Instrumentsproducts are NOT intended to be a substitute for any form of established process, procedure, or equipment used tomonitor or safeguard human health and safety in medical or clinical treatment.