NEC VT700 User Manual

Also see for VT700: Specifications Control commands Command guide Command guide Control commands

Contents

NEC VT700 User Manual Manual pdf 17 page image

92. Installation and ConnectionsFOCUSMENUSELECTLAMPSTATUSPOWERON/STAND BY SOURCEAUTO ADJ.ENTEREXITZOOMThis section describes how to set up your projector and how to connect video and audio sources.Your projector is simple to set up and use. But before you get started, you must first:1 Set up a screen and the projector.2 Connect your computer or video equipmentto the projector.(→ page 11,12,13,14,15,16)3 Connect the supplied power cable.(→ page 17)NOTE: Ensure that the power cable and anyother cables are disconnected before movingthe projector. When moving the projector orwhen it is not in use, cover the lens with thelens cap. Setting Up the Screen and the ProjectorSelecting a LocationThe further your projector is from the screen or wall, the larger the image. The minimum size the image can be isapproximately 21" (0.53 m) measured diagonally when the projector is roughly 38 inches (1.0 m) from the wall orscreen. The largest the image can be is 300" (7.6 m) when the projector is about 389 inches (9.9 m) from the wall orscreen.300"240 "200 "180"150"120"100"60"40"30"21"80"Distance (Unit: m/inch)Screen Size (Unit: cm/inch)Screen SizeLens center609.6(W)457.2(H) / 240(W)180(H)487.7(W)365.8(H) / 192(W)144(H)406.4(W)304.8(H) / 160(W)120(H)365.8(W)274.3(H) / 144(W)108(H)304.8(W)228.6(H) / 120(W)90(H)243.8(W)182.9(H) / 96(W)72(H)203.2(W)152.4(H) / 80(W)60(H)162.6(W)121.9(H) / 64(W)48(H)121.9(W)91.4(H) / 48(W)36(H)81.3(W)61.0(H) / 32(W)24(H)61.0(W)45.7(H) / 24(W)18(H)42.7(W)32(H) / 17(W)13(H)1.0/380.7/292.0/772.6/1033.3/1293.9/1554.9/1945.9/2336.6/2597.9/3119.9/3891.3/51FOCUSMENUSELECTLAMPSTATUSPOWERON/STAND BY SOURCEAUTO ADJ.ENTEREXITZOOMTIP:• The distances are indicated by intermediate values between tele and wide. Use as a rule of thumb.• The Zoom lever adjusts the image size +/-10%• For more details on throw distance, see page 10.To the wall outlet.