Using the BIOS Setup Utility 3-11Moving the Hard Disk DriveWhen a password protected HDD is moved from its original system and installed inanother system, error messages appear indicating that the drive is locked. Next, theSecurity Setup screen appears requiring the user to enter the master password to unlockthe drive. Highlight the HDD password line and enter the master password, whenprompted.If you wish to move an HDD from one system to another, follow steps 1 through 6 inthe section, “Establishing Hard Disk Drive Passwords,” before installing the HDD in adifferent system. Install the HDD in the desired system then follow step 7 to establishHDD protection.To take advantage of HDD password protection in another system, the system must beequipped with the same HDD password protection feature. To determine if the systemhas HDD password, check the System Security Setup in the BIOS setup to see if thereare provisions for establishing HDD passwords.Power Management SetupUse the Power Management Setup to balance high performance and energyconservation.Power Management SetupParameter DefaultSettingAlternate Setting(s)System Switch Power Button Sleep ButtonPower Managementunder ACOff OnPower Savings Level Longest Life High Perform/Custom/OffCPU Speed Control 100% 12.5, 25, 50%Hard Disk Timeout1 2 minutes 5/30/45 sec; 1/4/6/8/10/15 min.OffVideo Timeout 1 2 minutes 30/45 sec.; 1/4/6/8/10/15 min.OffPeripheral Timeout1 On OffAudio Device Timeout1 On OffStandby Timeout 1 4 minutes Off/1/2/6/8/10/15 min.Auto Suspend Timeout 1 10 minutes Off/5/15/20/25/30 min.LCD Suspend Disabled Enabled
