2-4 Getting StartedUsing the AC AdapterUse the AC adapter and power cable that came with your NEC Versa VX to run yourcomputer on alternating current (AC) power, or to recharge the battery pack. Use theAC adapter whenever a wall outlet is nearby.When connected, the AC adapter charges the battery whether or not the NEC Versa VXis powered on.Do not attempt to disassemble the AC adapter. The ACadapter has no user-replaceable or serviceable parts inside. Dangerous voltage in theAC adapter can cause serious personal injury or death. The AC adapter is intended foruse with a computer. Both must meet EN60950 standards.AC adapterNote The AC outlet voltage should be in the range of 100–240 Volts AC. Verify thatthe cord and plug are appropriate for your AC source.Connect the AC adapter as follows:Use only the AC adapter that comes with your NEC Versa VXsystem. Although other AC adapters may look similar, using them can damage thesystem.1. Connect the AC adapter cable to the power port on the back of your NEC VersaVX system.
