Using External Devices 8-3Parallel DevicesTo install a parallel device such as a printer, you need a cable with a male 25-pinconnector for the system and, for most parallel printers, a Centronics®-compatible 36-pin connector.Note When you connect a printer, be sure to install the appropriate printer driverthrough the Windows control panel.Connect a parallel device to your NEC Versa as follows.1. Check that power to both the NEC Versa and the device is off.2. Align and connect the 25-pin parallel cable connector to the parallel port on thesystem. Secure the cable with the screws provided.3. Align and connect the other end of the cable to the parallel port on the device.Lock the connector clips.Connecting a parallel printer4. Connect the power cable to the device and a properly grounded wall outlet.5. Turn on power to the system and the device.Note Check that the device is online before you try to use it. See the instructionsthat came with the device for more information.
