NEC VERSA P Service Manual

Also see for VERSA P: Manual

Contents

NEC VERSA P Service Manual Manual pdf 145 page image

5-6 Troubleshooting and Options for the Docking Station IITop Cover Mask AssemblyUse the following steps to remove the top cover mask assembly.1. Remove the following as previously described:n CRT base (if installed)n top cover.2. Position the top cover over so that the open end faces you. Remove the fivescrews securing the top cover mask assembly to the top cover.Figure Section 5-5 Top Cover Mask Assembly ScrewsBlank PanelsUse the following steps to remove the blank panels.1. Remove the following as previously described:n CRT base (if installed)n top cover.2. To remove a blank panel, push the notch on the left side of the blank panel andmove it to the right (see Figure Section 5-6).Remove the blank panel.Power Switch AssemblyUse the following steps to remove the power switch assembly.1. Remove the following as previously described:n CRT base (if installed)n top cover.Screw (one of five)