THUMBNAILS menuThe THUMBNAILS menu will appear when you press the MENU button on the remote control or the projectorcabinet. To close the THUMBNAILS menu, press the EXIT button.The THUMBNAILS menu includes the following commands:PLAY................... Plays.back.automatically.or.manually.depending.on.the.setting.in.Options..This.allows.you.to.move.on.to.the.next.slide.when.[MANUAL].is.selected.in.the.[PLAY.MODE].LOGO.................. Replace. the. default. background. logo. with. another. logo. in. JPEG,. BMP,. non-interlaced. GIF. or. non-inter-laced.PNG.format.OPTIONS............. Displays.the.Viewer.setting.options.REFRESH............ Reflects.the.new.information.in.the.list.of.folders.CONNECT............ Connects.a.shared.folder.to.the.NETWORK.drive.DISCONNECT...... Disconnects.the.share.folder.from.the.NETWORK.drive.Exiting ViewerTo exit Viewer, switch to another input such as COMPUTER 1, COMPUTER 2, COMPUTER 3, COMPONENT,VIDEO, S-VIDEO or NETWORK.* To switch to another input, there are two ways:• Press the COMPUTER 1, COMPUTER 2, COMPUTER 3, COMPONENT, VIDEO, S-VIDEO or NETWORKbutton on the remote control.• Press the MENU button on the remote control to display the Viewer menu. Press the MENU button again todisplay the main menu and select the input from the [SOURCE] submenu.With this function it is possible to switch directly to a slide when the picture of a VCR or computer is being projected.Example: When conducting presentations using a combination of slides and moving pictures from a VCR, etc., it ispossible to switch from a Viewer slide to the video picture then back to the Viewer slide simply by using the VIEWERbutton.NOTE: Even if you switch the current Viewer source to another source, the current slide is retained. When you return back to theViewer, you will get the slide that has been retained.5. Using the Viewer
