iiiImportant Information10°Place the projector in a horizontal positionThe tilt angle of the projector should not exceed 10 degrees, nor should the projector be installed in any way otherthan the desktop and ceiling mount, otherwise lamp life could decrease dramatically.Important SafeguardsThese safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please readthem carefully and heed all warnings.Installation• Do not place the projector in the following conditions:- on an unstable cart, stand, or table.- near water, baths or damp rooms.- in direct sunlight, near heaters or heat radiating appliances.- in a dusty, smoky or steamy environment.- on a sheet of paper or cloth, rugs or carpets.• If you wish to have the projector installed on the ceiling:- Do not attempt to install the projector yourself.- The projector must be installed by qualified technicians in order to ensure proper operation and reduce therisk of bodily injury.- In addition, the ceiling must be strong enough to support the projector and the installation must be in accor-dance with any local building codes.- Please consult your dealer for more information.WARNING• Do not cover the lens with the lens cap or equivalent while the projector is on. Doing so can lead to melting ofthe cap due to the heat emitted from the light output.• Do not place any objects, which are easily affected by heat, in front of the projector lens. Doing so could leadto the object melting from the heat that is emitted from the light output.
