3. Projecting an Image (Basic Operation)Adjusting the position of a projected image• Rotate the lens shift dial.LAMPSTATUSPOWERON/STAND BYSOURCEAUTO ADJUST3D REFORMSELECTUSBSELECTLENS SHIFTLEFTRIGHTDOWNUPWIRELESSWIRELESSLENS SHIFTLEFT RIGHTDOWNUPDesktop front projectionCeiling front projectionVertical shiftVertical shiftMax. 0.5VMax.0.5V1V0.5V0.1H 0.1H1HWidth of projected imageShift to left Shift to right1V Normal projectionPositionNOTE: The lens shift dial for LEFT-RIGHT cannot be rotated one-half turn or more.Do not over rotate it or it may break.NOTE: Shifting the lens to the maximum in two directions combined will cause the edges of the image to become dark or willcause some shadows.TIP: The lens shift dial for UP-DOWN can be rotated one turn or more, but not beyond the adjustable range defined below.NOTE: Lens shift is not available with the NP01FL optional lens. The NP01FL should be used only for “zero degree” applica-tions.
