096. Using On-Screen MenuUsing Multi-Screen Compensation [MULTI-SCREEN COMP.]This feature allows you to match images projected from multiple projectors that are placed in parallel.MODE..................... OFF:.Turns.off.this.function.to.return.to.the.normal.brightness.. .ON:.Turns.on.this.function.to.make.the.screen.darker..The.[BRIGHTNESS].and.the.[CONTRAST].can.be.adjusted.CONTRAST............. Adjusts.the.bright.part.of.the.picture.BRIGHTNESS.......... Adjusts.the.dark.part.of.the.picture.Adjusting1. Prepare black and white images so that the images can be displayed on the computer screen.2. Display the black image on the computer screen, and project the image from the projector.3. Select [MULTI-SCREEN COMP.] → [MODE] → [ON].4. Adjust the dark part of the images.Press the SELECT button to select [BRIGHTNESS] and use the SELECT or to match the black part ofanother projector.5. Display the white screen on the computer screen.Project the image from two or more projectors.6. Adjust the bright part of the images.Press the SELECT button to select [CONTRAST] and use the SELECT or to match the white part of an-other projector.Moving the slide bar toward [+] (plus) can change the white part of the image. Should this happen, move theslide bar toward [−] (minus) to adjust the brightness.TIP:• When you use multiple projectors, you can use the [CONTROL ID] function to operate a single projector or all the projectorsfrom the remote control. (→ page 125)• Your setting will not be affected even when [RESET] is done from the menu.
