212. Projecting an Image (Basic Operation)Adjusting the tilt (Tilt foot)Adjusting the left and right tilt.1. Remove the spacers.Rotate the tilt foot clockwise to loosen it (left and right).• The projector can be positioned with the spacers attached. Keepthe spacer.2. Rotate the tilt foot to adjust the left and right tilt.NOTE:• Do not extend the tilt foot beyond its height limit (18 mm/0.7 inches). Doingso may cause the tilt foot to come out of the projector.• Attach the spacer to each tilt foot when moving the projector.Finely adjusting the vertical tilt1. Remove the spacers.UpDown2. Rotate the tilt foot on each side to finely adjust the height.NOTE:• Do not use the tilt-foot for purposes other than originally intended.Misuses such as using the tilt foot to carry or hang (from the wall or ceiling)the projector can cause damage to the projector.
