1237. MaintenanceTo replace the filters:NOTE:• Replace all four filters at the same time.• Before replacing the filters, wipe off dust and dirt from the projector cabinet.• The projector is precision equipment. Keep out dust and dirt during filter replacement.• Do not wash the filters with soap and water. Soap and water will damage the filter membrane.• Put filters into place. Incorrect attachment of a filter may cause dust and dirt to get into the inside of the projector.Before replacing the filters, replace the lamp. (→ page 120)1. Push the button to release the filter cover and pull it out.Button2. Remove the two filter cases.Small filter case Large filter caseTabTab
