NEC MultiSync V652-TM User Manual

Also see for MultiSync V463: Manual Manual Specification Installation guide Product specifications

NEC MultiSync V652-TM User Manual Manual pdf 24 page image

English-22Setting DefaultPICTUREBACKLIGHT Adjusts the overall image and background brightness. Press + or - to adjust.Note: When AMBIENT1 or AMBIENT2 is selected in picture mode, this function cannot bechanged.70CONTRAST Adjusts the image brightness in relationship to the input signal. Press + or - to adjust.Note: When sRGB is selected in picture mode, this function cannot be changed.50SHARPNESS Adjusts the crispness of the image. Press + or - to adjust. 50*BRIGHTNESS Adjusts the image brightness in relationship to the background. Press + or - to adjust.Note: When sRGB is selected in picture mode, this function cannot be changed.50HUE Adjusts the hue of the screen. Press + or - to adjust.Note: When sRGB is selected in picture mode, this function cannot be changed.50COLOR Adjusts the color depth of the screen. Press + or - to adjust.Note: When sRGB is selected in picture mode, this function cannot be changed.50*COLOR TEMPERATURE Adjusts the color temperature of the entire screen. A low color temperature will make the screenreddish. A high color temperature will make the screen bluish. If TEMPERATURE needs furtheradjustment, the individual R/G/B/ levels of the white point can be adjusted. To adjust the R/G/Blevels, CUSTOM must be showing as the COLOR TEMP selection.Note: When sRGB is selected in picture mode, predefi ned 6500k is set so it cannot be changed.When PROGRAMMABLE is selected in GAMMA CORRECTION, this function cannot bechanged.10000KCOLOR CONTROL Adjusts the hue of the Red, Yellow, Green, Cyan, Blue and Magenta.Note: When sRGB is selected in picture mode, this function cannot be changed.0GAMMA CORRECTION Select a display gamma for best picture quality.Note: When sRGB is selected in picture mode, this function cannot be changed.NATIVE*(except sRGBsetting)NATIVE Gamma correction is handled by the LCD panel.2.2 Typical display gamma for use with a PC.2.4 Good for video (DVD, etc.)S GAMMA Special gamma for certain types of movies. Raises the dark parts and lowers the light parts of theimage (S-Curve).DICOM SIM. DICOM GSDF curve simulated for LCD type.PROGRAMMABLE A programmable gamma curve can be loaded using NEC optional software.MOVIE SETTINGSNOISE REDUCTIONVIDEO1, VIDEO2, S-VIDEO inputs onlyAdjusts the amount of noise reduction. Press + or - to adjust. 0*TELECINEHDMI, DVD/HD, SCART, VIDEO1,VIDEO2, S-VIDEO inputs onlyAutomatically senses the sources frame rate for optimal picture quality. AUTO*ADAPTIVE CONTRASTHDMI, DVD/HD, SCART, VIDEO1,VIDEO2, S-VIDEO inputs onlySets the level of adjustment for dynamic contrast. OFFPICTURE MODE Selects picture mode, [HIGHBRIGHT], [STANDARD], [sRGB], [CINEMA], [AMBIENT1] or[AMBIENT2]. See page 20.STANDARDRESET Resets the following settings within the PICTURE menu back to factory setting: BACKLIGHT,CONTRAST, SHARPNESS, BRIGHTNESS, HUE, COLOR, COLOR TEMPERATURE,COLOR CONTROL, GAMMA CORRECTION, MOVIE SETTINGS.-ADJUSTAUTO SETUPVGA, RGB/HV inputs onlyAutomatically adjusts Screen Size, H position, V position, Clock, Phase and White Level. -AUTO ADJUSTVGA, RGB/HV inputs onlyH Position, V Position and Phase are adjusted automatically when new timing is detected. OFFH POSITIONAll inputs except DVI, HDMI, DPORTControls the horizontal position of the image within the Display area of the LCD.Press + to move right. Press - to move left.-V POSITIONAll inputs except DVI, HDMI, DPORTControls the vertical position of the image within the Display area of the LCD.Press + to move up. Press - to move down.-CLOCKVGA, RGB/HV inputs onlyPress + to expand the width of the image on the right of the screen.Press - to narrow the width of the image on the left.-PHASEVGA, RGB/HV, DVD/HD, SCART inputs onlyAdjusts the visual “noise” on the image. -*: depends on signal input