292. Projecting an Image (Basic Operation)❾ Turning off the ProjectorTo turn off the projector:1. First, press the (POWER) button on the projectorcabinet or the STANDBY button on the remote con-trol.The confirmation message will be displayed.2. Secondly, press the ENTER button or press the(POWER) or the STANDBY button again.After the projector turns off, the cooling fans keep operatingfor a while (Cooling-off time).The cooling fans stop operating when the projector turnsoff and goes into standby mode. When in standby mode,the POWER indicator will light red and the STATUS indica-tor will light off when [NORMAL] is selected for [STANDBYMODE].Power OnSteady blue lightStandbySteadyred lightCAUTION:Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if theAC power supply is disconnected during normal projector operation.Use caution when picking up the projector.NOTE:• While the power indicator is blinking blue in short cycles, the power cannot be turned off.• You cannot turn off the power for 60 seconds immediately after turning it on and displaying an image.• Do not disconnect the AC power supply to the projector within 10 seconds of making adjustment or setting changes and closingthe menu. Doing so can cause loss of adjustments and settings.
