1236. Installation and ConnectionsConnecting an External MonitorYou can connect a separate, external monitor to your projector to simultaneously view on a monitor the computeranalog image you’re projecting.NOTE:• Daisy chain connection is not possible.• When audio equipment is connected, the projector speaker is disabled.Monitor out and sleep mode:• The MONITOR OUT (COMP.) connector will not work when [NORMAL] is selected for [STANDBY MODE].The MONITOR OUT (COMP.) connector will work only in the sleep mode.Applying a signal from the COMPUTER IN connector will put the projector in the sleep mode, which allows you touse the MONITOR OUT(COMP.) connector and the AUDIO OUT mini jack. Sound from the MIC input jack will beoutput to the AUDIO OUT mini jack.The sleep mode is one of the standby modes. The sleep mode cannot be selected from the menu.• In the network standby mode, sound for the last viewed computer or video source will be heard.BNC-to- D-SUB converted signal will not be output in the standby mode and sleep mode.MONITOR OUT(COMP.)AUDIO OUTAUDIO INCOMPUTER INComputer cable (VGA) (supplied)Stereo mini-plug audio cable (not supplied)Computer cable (VGA)(not supplied)
