1045. Using On-Screen MenuTurning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP.)]When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTERIN input will power on the projector and simultaneously project the computer’s image.This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinetto power on the projector.To use this function, first connect a computer to the projector and the projector to an active AC input.NOTE:• Disconnecting a computer signal from the computer will not power off the projector. We recommend using this function in com-bination of the AUTO POWER OFF function.• This function will not be available under the following conditions:- when a component signal is applied to the COMPUTER IN connector- when a Sync on Green RGB signal or composite sync signal is applied- when [NORMAL] is selected for [STANDBY MODE].• To enable the AUTO POWER ON(COMP.) after turning off the projector, wait 3 seconds and input a computer signal.If a computer signal is still present when the projector is turned off, the AUTO POWER ON(COMP.) will not work and the projectorremains in standby mode.Enabling Power Management [AUTO POWER OFF]When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min., 10min.,15min., 20min., 30min., 60min.) if there is no signal received by any input or if no operation is performed.NOTE:• This item can be selected only when [NORMAL] is selected for [STANDBY MODE].• When [NETWORK STANDBY] is selected, [AUTO POWER OFF] will turn grey in color and be disabled and [0:15] will be selectedautomatically.Selecting Default Source [DEFAULT SOURCE SELECT]You can set the projector to default to any one of its inputs each time the projector is turned on.LAST ���������������������� Sets the projector to default to the previous or last active input each time the projector is turned on�AUTO ��������������������� Searches for an active source in order of COMPUTER → HDMI1 → HDMI2 → VIDEO → USB-A → USB-B→ COMPUTER and displays the first found source�COMPUTER ����������� Displays the computer signal from the COMPUTER IN connector every time the projector is turned on�HDMI1 ������������������� Displays the digital source from the HDMI 1 IN connector every time the projector is turned on�HDMI2 ������������������� Displays the digital source from the HDMI 2 IN connector every time the projector is turned on�VIDEO �������������������� Displays the Video source from the VIDEO IN connector every time the projector is turned on�USB-A �������������������� Displays slides or plays back movie files from the USB memory device every time the projector is turnedon�LAN������������������������ Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit�USB-B �������������������� Displays the computer signal from the USB-B port every time the projector is turned on�
