624. Using the ViewerRemoving the USB memory from the pro-jector1. Select the VIEWER start screen.Press the EXIT button with no menu displayed.2. Remove the USB memory from the projector.Make sure that the LED on the USB memory is notflashing before removing the USB memory.NOTE: If you remove the USB memory from the projector witha slide displayed, the projector may not operate correctly. Ifthis happens, turn off the projector and unplug the powercord. Wait 3 minutes, then connect the power cord, and turnon the projector.Exiting the Viewer1. Press the MENU button with the slide screen orthe thumbnail screen displayed.The control bar or the pop-up menu will be dis-played.2. Press the MENU button again.The on-screen menu will be displayed.3. Select a source other than [VIEWER] and pressthe ENTER button.The Viewer will be exited.TIP: To exit the Viewer using the remote control, select a sourceother than [VIEWER].WIRELESSWIRELESS
